Horn Bills 1000s & 2000s Static switch have different user selectable parameters with DSP control. It is excellent performance and enhancement system useful for Data center, Process Automation, Power plant, Healthcare, Telecom, Broadcasting, Industry type of environment. Automatic instantaneous transfer and retransfer without cross connection of sources.
HORNBILL 1000S & 2000S
Features & Benefits
- 32 bit DSP controllers
- Automatic instantaneous transfer and retransfer without cross connection of sources
- Interlocking of hardware & software to avoid make – before switching
- Enhanced monitoring and diagnostics
- RS 232 or RS 485 interface with MODBUS protocol
- Redundant power supply
- 19″ Rack mountable
- Complies with IEEE 446
- Natural air cooled for highest reliability
Technical Specification (Horn Bills 1000s & 2000s)
| INPUT / OUTPUT | ||
| Nominal Voltage | 110 / 115/230 / 240 VAC (1 Ph + N) | |
| Voltage Tolerances | +/- 15% | |
| Frequency Tolerances | wide band 40 – 70 Hz Auto Selectable | |
| Power Capacity | 16A / 32A | |
| No. of Switching Poles | SINGLE | TWO |
| Overload Capacity | 110% for 1 hour, 150% for 60 s, 200% for 10 s, 1000% for 100 ms | |
| Duty | Continuous | |
| Load Power Factor range | 0.6 to unity leading or lagging | |
| Source Voltage Distortion | > 10% THD | |
| Controller | 32 bit DSP | |
| SWITCH | ||
| Transfer | < 5 ms in sync & < 15 ms in No sync | |
| Retransfer | < 5 ms in sync & No sync | |
| Manual Bypass | Provided | |
| Efficiency (Ref. IEC 60146-1-1)* | ≥ 99% | ≥ 98% |
| ENVIRONMENTAL | ||
| Operating Temperature | 0 to 40°C | |
| Storage Temperature | 0 to 70°C | |
| Relative Humidity | Up to 95% (Non Condensing) | |
| Acoustic Noise @1 m (Ref. ISO 3746) | ≤ 45 dBA | |
| Altitude | ||
| PHYSICAL | ||
| Enclosure Protection | IP – 20 | |
| Cooling | Natural | |
| Color | RAL 7016 | |
| Cable Entry | Back | |
| Dimensions | 2 U (485 x 450 x 132 mm) | |
| Installation | 19″ Rack Mountable | |
| USER INTERFACE | ||
| Indications | Source 1 Healthy, Source 1 Priority, Source 1 Feeding, Source 1 Manual bypass ON, Output ON | |
| Source 2 Healthy, Source 2 Priority, Source 2 Feeding, Source 2 Manual bypass ON, No Sync | ||
| Fault Indication | Overload | |
| Standards | IEC 62310-1, IEEE 446 | |
| Other Features | RS 485 MODBUS | |