All Microtek Product Ranges are specially designed for the User’s Benefit.
MODEL |
i-MAXX 7.5KVA/192V |
Phase |
Single Phase with Ground |
Capacity |
7.5KVA /6KW |
NOTE: Product Specifications are subject to change without prior notice.
INPUT |
Nominal Voltage |
208VAC/220VAC/230VAC |
Acceptable Voltage Range |
165 ~285 VAC |
Frequency |
40 Hz~55Hz @ 50 Hz system |
EFFICIENCY |
AC Mode |
87.00% |
Battery Mode |
91% |
EXTERNAL BATTERY |
Recommended Battery Type |
DEFAULT : VRLA / SMF BATTERY TUBULAR BATTERY : OK (WITH CHARGER CUT-OFF VOLT ADJUSTABLE FROM LCD DISPLAY) |
Numbers |
16 |
Charging Current (Max.) |
Default: 8A±10%; Max: 2A, 4A, 8A (Adjustable) |
Charging Voltage (Default) |
Boost Voltage : 224Vdc +-1%, 14.0V/Battery |
Float Voltage : 217.6Vdc +- 1%, 13.6V/Battery |
INDICATORS |
LCD |
Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode, and Fault Indicators |
ALARM |
Battery Mode |
Sounding every 4 seconds |
Low Battery |
Sounding every second |
Overload |
Sounding twice every second |
Fault |
Continuously sounding |
PHYSICAL |
Dimension, DxWxH(mm) |
562 x 250 x 830 |
Net Weight (kgs) |
78 |
OUTPUT |
Nominal Voltage |
208VAC/220VAC/230VAC |
Voltage Regulation |
± 1 % |
Frequency Range (Synchronized Range) (Mains Mode) |
45Hz~55Hz |
Frequency Range (Battery Mode) |
50 Hz ± 0.1 Hz |
Overload Specs (Mains Mode) |
110%- 120% : 30 MIN
120% – 130% : 5MIN
>130% : 1 SEC |
Overload Specs (Battery Mode) |
110% – 120% : 3 MIN
120% – 130% : 1 MIN
> 130% : 1 SEC |
Current Crest Ratio |
3 : 1 |
Harmonic Distortion |
≦ 3 % THD (Linear Load) |
≦ 5% THD (Non-Linear Load) |
Transfer Time |
AC to DC |
Zero |
Inverter to Bypass |
Zero (Turn OFF / Common Fault) |
Bypass to Inverter |
< 5ms (Turn ON/ System Recovery) |
Waveform (Battery Mode) |
Pure Sine wave |
ENVIRONMENT |
Operating Temperature |
0~50ºC (Battery life cycle will shorten when temperature is above 25ºC) |
Humidity |
0~95% (Non-Condensing) |
Noise Level |
Less than 50dB @ 1 Meter |
MANAGEMENT |
Modbus RS-232/RS485 |
Supports Windows® 2000/2003/XP/Vista/2008/7/8, Linux and MAC |
Dry Contact |
5 Signals: AC Failure, Low Battery, UPS Alarm, Bypass and UPS Fault |
Optional SNMP |
Power Management from SNMP Manager and Web Browser |
Warranty |
One Year |
Reviews
There are no reviews yet.